SMAS Sodium 2-methylprop-2-ene-1-sulfonate CAS 1561-92-8

SMAS is a new type of sulfate anionic surfactant. It is easily soluble in water, has good dispersibility, good compatibility with hard water and high electrolyte stability. CAS No. : 1561-92-8 Purity: 99.5% Appearance: White powder Packaging: 25kg/ba…

More>>

PGMS Propylene glycol monostearate CAS 1323-39-3

White powder or flake solid, insoluble in water, soluble in ethanol and other organic solvents, is a non-ionic emulsifier. About PGMS Propylene glycol monostearate: White powder or flake solid, insoluble in water, soluble in ethanol and other org…

More>>

DPNB Dipropylene glycol monobutyl ether CAS 35884-42-5

Monobutyl ether monobutyl dibutyl is a colorless, odorless liquid. Relative densities (25) are 0.914 and flash points (opening) are 112.7. It is low-toxic. DPNB (Dipropylene Glycol Monobutyl Ether): DPNB Dipropylene monobutylether is an organic ma…

More>>

Propylene glycol phenyl ether CAS 770-35-4

PPH and Eastman chemical company's T is a typical high efficiency film forming agent. About Propylene glycol phenyl ether: When PPH is added to the latex system, it is redistributed in the aqueous phase and the polymeric phase. Its excellent fil…

More>>

PPH Propylene glycol phenyl ether CAS 770-35-4

PPH can replace the isophorone series, DBE series, benzyl Alcohol, ethylene glycol, and phenylether series that are toxic or smelly. What is PPH Propylene glycol Phenyl Ether? Propylene phenyl glycol is a solvent with slow evaporation after the re…

More>>

PM Proprylene glycol monomethyl ether

Proprylene monomethyl-ether is an odorless, transparent liquid that can be miscible in water. The relative density is 0.9234.Solvent, dispersant or diluent. About PM Propylene Glycol Monomethyl Ether: Propylene Glycol Ether and Ethylene Glycol Et…

More>>

LAS-IPA Dodecyl-benzenesulfonic Aci Isopropylamine Salt CAS 26264-05-1

LAS-IPA foam is mild, detergent, biodegradable, and rich. Purity: 90% About Dodecyl-benzenesulfonic Aci Isopropylamine Salt: Dodecyl-benzenesulfonic Aci Isopropylamine Salt has the characteristics of rich and fine foam, low degreasing power, lo…

More>>

Polyethylene-polypropylene glycol

Polyethylene-polypropylene glycol is a colorless transparent liquid to white paste to white solid and degradable non-ionic surfactant. About Polyethylene-polypropylene glycol: Polyethylene-polypropylene glycol is usually of the following types: m…

More>>

Lauryl polyoxyenthylene polyoxypropylene block polyether

Lauryl polyoxyenthylene polyoxypropylene block polyether is a chemical, its molecular formula is C12H25O(C3H6O)A(C2H4O)BH A+B=10. Acitve matte content: 99% Lauryl polyoxyenthylene Polyoxypropylene Block Polyether Lauryl polyoxyenthylene is a stro…

More>>

Sodium Cocoyl Glycinate CAS 90387-74-9 Properties

It is made from coconut oil and glycine. Main surfactant dosage: 10-50%. Auxiliary surfactant dosage: 2-10%. About Sodium Cocoyl Glycinate CAS 90387-74-9 It is highly foaming in alkaline and neutral environments. The foam produced by this product…

More>>

Isomeric octanol ethoxylates Properties

This agent is good for cleaning and penetrating. It has high permeability and washing ability. Active matter value: >=99.5 About Isomeric octanol Etoxylates Rich foam with high permeability is a great penetrant. It can be used in conjunction with…

More>>

Glycerol polyoxyethylene-b-oxypropylene Ether CAS 9082-00-2

Low foaming ability, good dispersing and emulsifying powers, along with good fluidity at low temperatures. About Glycerol polyoxyethylene-b-oxypropylene Ether: Low foaming, good dispersing, strong emulsifying, and good low temperature fluidity. I…

More>>

Related news

Bangladesh's government has also been forced to cut back on electricity generation, which has had an impact on the market for temperature controlled

According to Bangladesh, July 7, the daily sun reported on Wednesday, in video way at Chittagong university of engineering science (CUET) meng first based on the campus of the IT business incubator project, Bangladesh prime minister sheik Hasina said…

More>>

Disodium lauroamphodiacetate 

It is a mild performer with good acid and alkali tolerance, hard-water resistance, compatibility, corrosion inhibition, and antistatic properties.Solid Content: 35-2 Disodium Lauroamphodiacetate It has a good surface activity and is foaming and…

More>>

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

By sintering tungsten, a target made of tungsten is created. Customers may request different shapes or sizes for tungsten targets. About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets: Chemistry: Properties: Good resistivity and…

More>>

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%