Tin disulfide, also known as SnS2, is an inorganic chemical compound. The yellow hexagonal flakes have a CdI2 crystalline structure. It is barely soluble. Purity: 99.99%
Particle size: 100mesh
Stannic Sulfide SnS2:
Tin disulfide
If you want to know more about a specific topic, please click on the link.
stannic sulfide
Is an inorganic compound.
Stannic sulfide Formula
It is SnS2. It is a yellow hexagonal flakes with a CdI2 crystalline structure. It is not very soluble but is soluble when mixed with hot alkali and aqua regia.
Stannic sulphide
It is used to make gold paint.
Tin(IV) sulfide
The crystallization occurs in cadmium iodide, with Sn(IV), located in an octahedral "pore", defined by six sulfur centers. It appears naturally as the rare mineral, montmorillonite. The bandgap is 2.2eV and it can be used for semiconductor materials.
SnS2 is a n-type semiconducting material with a hexagonal CdI2 structural.
Tin disulfide SnS2
This is a layered metal-dihalide semiconductor that has a crystal and chemical structure similar to the molybdenum disulfide (MoS2). Sn is sandwiched by two Slayers, which have strong covalent ties, while the monolayer is kept together with weak van der Waals forces. If the van der Waals weak force is overcome through physical or chemical peeling then each layer will easily break.
SnS2 can be used to make photovoltaic solar panels, FETs and sensors.
Tin disulfide has an acidic sulfuric nature. It can be dissolved by aqua regia, hot alkali, concentrated hydrochloric, but not in water. It can be dissolved by ammonium-sulfide.
Send an inquiry for the latest news
stannic sulfide price
You can also contact us if you have any questions.
Stannic Sulfide SnS2 - Powder
Bulk discounts are available.
Stannic Sulfide, CAS 1314-95-0:
Product Name
stannic sulfide
;
tin sulfide
;
stannic sulphide
Stannic Sulfide formulation
: SnS2
Stannic Sulfide colour: yellow
Stannic Sulfide particles size: 100mesh
Stannic Sulfide purity 99.99%
Stannic Sulfide appearance: yellow powder
Stannic Sulfide density
: 4.5g/cm3
Stannic Sulfide:
Under high temperature, high pressure and vacuum, 1mol high-purity tin is melted and then 2mol high-purity hydrogen are melted.
Stannic Sulfide:
SnS2
|
Zn
|
|
Curiosity
|
Ca
|
Al
|
Mg
|
You can also find us on Twitter @Ni
|
Pb
|
As you can see,
|
99.99%
|
<=8ppm
|
<=8ppm
|
<=2ppm
|
<=5ppm
|
<=4ppm
|
<=6ppm
|
<=5ppm
|
<=7ppm
|
<=4.5ppm
|
How do you pronounce
Stannic Sulfide SnS2 Poudre
produced?
The acid solution containing tin tetrachloride can be treated with hydrogen sulfide in order to obtain a bright yellow tin diulfide precipitate.
Selenium disulfide may also be produced by the action sulfide has on tin-chloride solution.
By combining tin, sulfur and iodine in presence of tin, a disulfide is obtained. The reaction needs to be heated.
Sn + S = SnS2
One method is to dissolve the tin-IV salt in hydrogen sulfide.
Stannic Sulfide SnS2 - Applications
:
Tin disulfide, or SnS2, is a van der Waals semiconductor material that has excellent photoelectric properties. Material is non-toxic, environment friendly, high in content, and easy to make. Tin sulfide has properties that are similar to semiconductors. These are used primarily in research and development in labs and for experiments. They are also highly active on the current market.
Tin disulfide has an n-type crystal structure of hexagonal CdI2 with a large bandgap (about 2.35eV). It is a semiconductor with good optical properties, electrical properties, and can be utilized for solar cell materials, anode material of Lithium Chemicalbook sytem sub-cells and other applications.
As tin diulfide is environmentally safe, has a similar bandgap to silicon and a high absorbance coefficient, it's a great choice for an absorber in solar cells. Experts from both home and abroad have been researching it for many years. This material can be used to manufacture and imitate gold. Use for paints etc.
Single-layer SnS2 can be made by stripping mechanically or with liquids from a tin-disulfide-single-crystal.
Tin disulfide can be used for liquid chemical exfoliation in order to produce SnS2 particles and nanosheets with as few as a couple of layers.
Tin disulfide exhibits high surface activity and a high level of sensitivity. SnS2 is also used as a single-layer, or multi-layer, ultra-thin SnS2 film, made from powder and bulk crystals. It has been used to make light emitters and field-effect transistors (FET), as well gas sensors and photodetectors. Thermoelectric Photovoltaic, other fields, and energy-storage equipment such as lithium-ion cells.
Stannic Sulfide SnS2: Storage Conditions
Stannic Sulfide SnS2 is affected by damp reunion, which will have an adverse effect on the powder's dispersion and use. Therefore, Stannic Sulfide SnS2 must be packed in vacuum and kept in a dry and cool room. SnS2 Powder should not be exposed to stress.
Stannic Sulfide (SnS2) Powder Packing & Shipping:
Stannic Sulfide SnS2 is available in a variety of different packings.
Stannic Sulfide SnS2 POWDER packing: Vacuum packaging, 100g/bag, 500g/bag, 1kg/bag. 25kg/barrel. Or as per your request.
Stannic Sulfide SnS2 Poudre powder shipping: Can be shipped by air, sea or express as soon as payment is received.
Technology Co. Ltd., () is an established global chemical supplier and manufacturer, with a 12-year history of providing high-quality nanomaterials. These include boride powders, nitride particles, graphite particles, sulfide particles, 3D-printing powders, etc.
Looking for high quality
Stannic sulfide is a powder.
Send us a message or feel free contact us. (
brad@ihpa.net
)