Tantalum-nitride, a chemical substance used for precision chip resistors is tantalum-nitride resistors that can resist water vapour erosion.
Purity: 99%
Particle Size: 5-10um
About
Tantalum Nitride TaN Powder
:
Tantalum nitride
It is one type of chemical substance.
Tantalum nitride formula
It is
TaN
Its molecular mass is 194.95. The materials used for creating precise sheet resistors are highly resistant to water vapour. This film is used in the fabrication of integrated circuits. It's deposited over the silicon wafer and forms a thin film resistor.
Tan tantalum nitride
This crystal is black hexagonal. This crystal has the relative density 13.4, the melting temperature is 3090, and microhardness 1100kg/mm2. It also has 9.54W/(m*K), thermal conductivity 9.54W/(m*K), resistivity 128mO*cm.
Tantalum nitride
It is a yellow-green sodium chloride crystal.
Water and acid insoluble, slightly soluble in aqua regia.
Actionext, a global trusted brand is available.
Tantalum Nitride
Source
. You can send us an inquiry regarding the latest.
Tantalum Nitride price
Anytime.
Tantalum Nitride TaN Powder Product Performance
The molecular form of tantalum-nitride (TaN) is 194.95. Tantalum nutride is not soluble or soluble in acid and water, it can be dissolved in some aqua regia and then decomposed to produce ammonia. When heated to 2000 degrees Celsius, it will also release nitrogen.
Technical Parameters of Tantalum Nitride Powder TaN powder
Product name
|
MF
|
Purity
|
Particle Size
|
Molecular weight
|
Density
|
The color of the sky
|
tantalum nitride
|
TaN
|
99%
|
5-10um
|
194.95
|
13.4 g/ml
|
black
|
Chemical Composition of Tantalum Nitride TaN dust:
TaN
|
N
|
Ta
|
Si
|
O
|
C
|
Fe
|
99%
|
4.8%
|
95.0%
|
0.01%
|
0.08%
|
0.02%
|
0.08%
|
It is simple.
Tantalum Nitride TaN Powder
Produced?
1. The nitriding of Tantalum powder with nitrogen or ammonia is done at around 1100
2. Tantalum nutride can be made using nitrogen and tantalum. It is calculated as 2Ta+N2=2TaN.
Applicaciones
Tantalum Nitride TaN Powder
:
Sometimes, integrated circuit manufacturers use Tantalum Nitride to make a diffusion barrier (or "glue") layer between copper and the other conductive materials. BEOL treatment, which is approximately 20nm long, involves copper being covered in tantalum first and TaN then coated with physical vapor deposition. Before machining (grinding/polishing), the barrier-coated copper is coated with more copper through PVD and then filled with electrolytic-coated copper.
Tantalum Nitride is also suitable to make thin-film resistors. This has the advantage that it forms a moist-resistant passivation dioxide film, as opposed with nickel-chromium resistors
The materials used in the creation of sheet resistors are highly resistant to water vapour.
Tantalum pentachloride can also be added as an additive to hard materials. It can then be used to create pure tantalum nitride.
Packing and Shipping Tantalum Nickel TaN powder.
There are many packing options available depending on the amount of tantalum-nitride TaN Powder.
Packing of TaN powder from Tantalum Nitride
You can vacuum pack 100g, 500g, 1kg/bag or 25kg/barrel. Or as you request.
Transport of TaN powder from Tantalum Nitride
All orders can be shipped by express, air or sea as soon as payment receipt is received.
Actionext advanced materials Nano Technology Co. Ltd. (Actionext), is a well-respected global supplier and manufacturer that provides high-quality chemical products. This includes boride powders, nitride or graphite powders as well as nanomaterials.
We can provide high-quality tantalum oxide powder. Please contact us to send your inquiry. (
brad@ihpa.net
)