Answers

  • 0
  • 0

The Next Profit Margin in The Alumina Industry-Red Mud

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



In the absence of new countries to replace China's declining aluminum demand, the era high profit in alumina is expected.
Only the complete utilization of red mud (also known as "the worldwide problem"), which is expected to bring the next profit, can be expected in the case where the alumina manufacturing process has not been changed for decades.

The first thing you need to know about red mud

Alumina produces approximately 1.5 tons of red clay, which has a particle size of 0.088 - 0.25 mm, specific gravity of 2.5-2.9, bulk density of 0.8 - 1.0, and melting point of 1200-1250°C. Below is a table that shows the composition of red clay:

The Bayer method is used to produce the majority of alumina in China. The Bayer Method is characterized with high levels of iron, aluminium and alkali.

Second, the typical case study of alumina companies in the complete utilization of red clay

1. Chinalco Shandong Branch. The data available shows that in 2016, the red mud utilization rate was 25 percent. China's enterprises that produce alumina have an average consumption rate of 12 million mud. Henan Aluminium Industry Transformation and Growth Action Plan (2018-2010) clearly states that the comprehensive usage rate of red clay will reach 10% by 2020. No harm will come if there is no comparison. China's comprehensive utilization rate is too low. The main uses of mountain aluminum red clay are the development of new coal-burning de-sulfurizer technologies, high-grade concrete, highway subgrades and brick making.

2. Weiqiao Group, 2018: 20,000 tons of mud red were used to cover the 5.3 km roadbed in the Binzhou section Jiqing Expressway. According to estimates each kilometer of expressway could consume 200,000 tons red mud. Provincial highways can consume up to 60,000 tonnes of red dirt, and municipal road can consume up 20,000 tons. Future market opportunities are wide for countries in China that have a lot of highway mileage.

Third, the typical social case in the use of red clay

Shandong Satellite TV broadcasted a story on December 31st, 2018 about Zibo Tianzhirun Ecological Technology Co. Ltd. using large amounts of red dirt to produce permeable blocks (consuming 70,000 tons per year). The red-mud permeable bricks project was chosen as one of Shandong Province's top ten innovations for the circular economy in 2018 with a red-mud blending rate exceeding 90%. The company boss invested 30 million. After Zui, only two houses were studed.

This is not merely reminiscent of the fact the enterprises in Inner Mongolia have spent hundreds of billions of dollars trying to crack the production alumina from fly ash and yet there hasn't been a breakthrough.

Fourth, comprehensive red mud usage recommendations

Red mud has been used for a longer time in the production and use of roadbeds. Each has its advantages and disadvantages. There is a cement factory nearby and the consumption of roadbeds is high. The future demand for permeable blocks is low in economically developed areas. Therefore, it's possible to promote the production of these bricks nationwide. The only disadvantage is the fact that it is more cost-effective to sell bricks within a radius of 800 km.

China's red mud alumina is generally used at a very low rate. Our utilization rate may not be as low as that of other countries, but we cannot compare ourselves to foreign countries. China's alumina has entered a new era, one of self-transcendence. We are now able to make full use of red mud. The company's alumina position will be reshaped by the profit margin.

Tech Co., Ltd. is a chemical products manufacturer with more than 12 years' experience. Contact us if you need high-quality Aluminum Oxide. Send an inquiry .

Inquiry us

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It is easily soluble when heated alkali is used, but not in water.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2) Powder: Germanium Sulfid…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Molybdenum powder boride is a combination of molybdenum with boron. The chemical formula for molybdenum is MoB2, and the molecular weight is 202.69. Purity: >99%Particle size : 5-10um Molybdenum Boride MoB2 Pulp : Molybdenum-boride consists of moly…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal…