Trending
If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Ti6Al4V referred to as TC4, is an a-b titanium alloy with a high strength-to-weight ratio and excellent corrosion resistance. It is one of the most commonly used titanium alloys and is widely used in low density.
About 3D Printing Ti6Al4V Powder TC4 Powder: Ti6Al4V referred to as TC4, is an a-b titanium alloy with a high strength-to-weight ratio and excellent corrosion resistance. It is one of the most commonly used titanium alloys and is widely used in low density and excellent corrosion resistance is necessary for such aerospace industry and biomechanical applications (implants and prostheses).Ti6Al4V is generally considered to be the "base" of the titanium industry because it is by far the most widely used titanium alloy, more than 50% of the total amount of titanium. It is an a+b alloy that can be heat treated to achieve moderate strength. Titanium 6 aluminum 4 vanadium is recommended for use at temperatures not exceeding 350/660.
The composition of TC4 titanium base powder is Ti6Al4V, which belongs to (a+b) type titanium alloy, and has good comprehensive mechanical properties.TC4 titanium alloy has excellent corrosion resistance. It has a series of advantages such as low density, high specific strength, good toughness, good weldability and so on. It has been used in aerospace, petrochemical, shipbuilding, automobile, pharmaceutical and other industries.
Compared with traditional stainless steel and cobalt-based alloys, titanium alloys are increasingly used as biomaterials due to their lower modulus, excellent biocompatibility and enhanced corrosion resistance. These attractive properties have been the driving force for the early introduction of (CpTi) and A # B (Ti6Al4V) alloys, as well as for the newer development of new titanium alloy compositions and orthopedic metastable B titanium alloys.Alloy.The latter has enhanced biocompatibility, reduced elastic modulus, and excellent strain control and notch fatigue strength. However, the poor shear strength and wear resistance of titanium alloys still limit their biomedical applications. Although some improvement has been shown in the wear resistance of B-Ti alloys compared to A # B alloys, the end-use of orthopedic titanium alloys as wear components will require a more complete basic understanding of the wear mechanisms involved. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Ti6Al4V Powder TC4 Powder in bulk.
Main elements:
|
Al |
V |
Ti |
|
5.50-6.75 |
3.50-4.50 |
Bal |
Impurity elements:
|
Fe |
C |
N |
H |
O |
Y |
|
<=0.3 |
<=0.08 |
<=0.05 |
<=0.015 |
<=0.2 |
<=0.005 |
|
Alloy grades and characteristics |
|
|
Alloy number: |
TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19,
|
|
Particle size: |
0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm |
|
Morphology: |
Spherical or nearly spherical |
|
Appearance: |
Grey |
|
Package: |
Aluminum bag,Vacuum packing |
|
Application: |
3D printing metal powder |
|
Other applications: |
powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc. |
Ti6Al4V Powder TC4 Powder Properties |
|
| Other Names | Ti6Al4V Powder, TC4 Powder |
| CAS No. | N/A |
| Compound Formula |
TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19,
Ti40,Ti60,TiAl(Ti36Al,Ti48Al2Cr2Nb),TiNi,TiNb,ZrTi |
| Molecular Weight | N/A |
| Appearance | Grey powder |
| Melting Point | N/A |
| Solubility in water | N/A |
| Density | N/A |
| Purity | 99% |
| Particle Size | 0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm |
| Boling point | N/A |
| Specific Heat | N/A |
| Thermal Conductivity | N/A |
| Thermal Expansion | N/A |
| Young's Modulus | N/A |
| Exact Mass | N/A |
| Monoisotopic Mass | N/A |
Ti6Al4V Powder TC4 Powder Health & Safety Information |
|
| Safety Warning | N/A |
| Hazard Statements | N/A |
| Flashing point | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Statements | N/A |
| RTECS Number | N/A |
| Transport Information | N/A |
| WGK Germany | N/A |
Inquiry us
Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It is easily soluble when heated alkali is used, but not in water.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2) Powder: Germanium Sulfid…
Molybdenum powder boride is a combination of molybdenum with boron. The chemical formula for molybdenum is MoB2, and the molecular weight is 202.69. Purity: >99%Particle size : 5-10um Molybdenum Boride MoB2 Pulp : Molybdenum-boride consists of moly…
Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal…