Concrete Admixtures

  • 0
  • 0

Air Entraining Agent in Concrete

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



The ability to inject large numbers of small air bubbles throughout concrete mixers, to decrease bleeding, segregation, workability and improve overall concrete quality, is known as an "air-entraining agent".

Description An Air Training Agent Agent for Air-entrainment The ability to mix concrete with a lot of tiny, evenly distributed air bubbles. It helps to decrease the amount of bleeding and segregation. concrete mixture It will increase workability and dramatically improve frost resistance. concrete admixtures .

What's an air entraining device?
The vast majority Air entraining agents These are anionic surfactants. At the water-air interface the hydrophobic groups is directed toward the air. The hydrophobic layer of hydrated particles is formed when the concrete mixture is mixed. The directional adsorption layers of these air bubbles are the same as their charge. They repel each other, and they can be evenly distributed.
The anionic air-entraining substances can also be used to prevent bubbles bursting. They are absorbed onto the bubble film by calcium salt precipitation, which is found in high calcium cement.

Technical Parameters of the air entraining agents
Articles Main component Appearance Density(g/cm3) pH (1 % water solution) 20 viscosity(20,Sp2,100rpm)
Standard Surfactant for alkylether anionics: You can choose from colorless or yellowish liquid
1.03+-0.02
6.0-8.0
1.21~1.48
300-1500


Characteristics of an air entraining agent
1. You will be amazed at its remarkable properties of fine, consistent and long lasting air bubbles.
2. Concrete can be made more workable and easier to pump.
3. This inhibits water secretion and segregation.
4. Enhances resistance to freeze-thaw and durability.
5. Reducing slump losses
6. You can use it to make concrete for various projects, including hydraulic, marine and port.
7. This mortar is compatible with several types of mortars.

Use of concrete air entraining agent
1. Increase the usability of concrete mixes.
2. Significantly increase the concrete's frost resistance and impermeability.
3.Reduce concrete strength. The average concrete strength decreases by about 1% when its air content is increased by 4% to 6.6%. Conversely, it will lose 2% to 3.3% of its flexural strengths.

Be aware Agent for air entraining
1. This product is not toxic and innocuous, it can be biodegraded, but it cannot be eaten.
2. You should rinse it off with lots of water if it gets in your eyes.
3. A doctor should be consulted immediately if allergies are caused to an organ of the human body.

Inquiry us

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It is easily soluble when heated alkali is used, but not in water.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2) Powder: Germanium Sulfid…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Molybdenum powder boride is a combination of molybdenum with boron. The chemical formula for molybdenum is MoB2, and the molecular weight is 202.69. Purity: >99%Particle size : 5-10um Molybdenum Boride MoB2 Pulp : Molybdenum-boride consists of moly…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal…