Hasad Foods, the agricultural investment arm of Qatar's sovereign wealth fund, said the government would increase its grain reserves from 250,000 tons to 300,000 tons in the near future, which is enough to feed the population for six months.  

With a lot of deserts, Qatar suffers from water shortages, and Qatar depends on food imports for a long time. Recently, the ongoing tension in Ukraine has caused global food supply tension and rising prices.

In addition to that, the geopolitical situation also affects the supply and prices of many commodities like the Ti6Al4V Powder.

About 3D Printing Ti6Al4V Powder TC4 Powder:
Ti6Al4V referred to as TC4, is an α-β titanium alloy with a high strength-to-weight ratio and excellent corrosion resistance. It is one of the most commonly used titanium alloys and is widely used in low density and excellent corrosion resistance is necessary for such aerospace industry and biomechanical applications (implants and prostheses).Ti6Al4V is generally considered to be the "base" of the titanium industry because it is by far the most widely used titanium alloy, more than 50% of the total amount of titanium. It is an α+β alloy that can be heat treated to achieve moderate strength. Titanium 6 aluminum 4 vanadium is recommended for use at temperatures not exceeding 350℃/660℉.

The composition of TC4 titanium base powder is Ti6Al4V, which belongs to (α+β) type titanium alloy, and has good comprehensive mechanical properties.TC4 titanium alloy has excellent corrosion resistance. It has a series of advantages such as low density, high specific strength, good toughness, good weldability and so on. It has been used in aerospace, petrochemical, shipbuilding, automobile, pharmaceutical and other industries.

Compared with traditional stainless steel and cobalt-based alloys, titanium alloys are increasingly used as biomaterials due to their lower modulus, excellent biocompatibility and enhanced corrosion resistance. These attractive properties have been the driving force for the early introduction of (CpTi) and A # B (Ti6Al4V) alloys, as well as for the newer development of new titanium alloy compositions and orthopedic metastable B titanium alloys.Alloy.The latter has enhanced biocompatibility, reduced elastic modulus, and excellent strain control and notch fatigue strength. However, the poor shear strength and wear resistance of titanium alloys still limit their biomedical applications. Although some improvement has been shown in the wear resistance of B-Ti alloys compared to A # B alloys, the end-use of orthopedic titanium alloys as wear components will require a more complete basic understanding of the wear mechanisms involved. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Ti6Al4V Powder TC4 Powder in bulk.

Main elements of Ti6Al4V Powder:

Al	V	Ti
5.50-6.75	3.50-4.50	Bal

 

Impurity elements of Ti6Al4V Powder:

Fe	C	N	H	O	Y
≤0.3	≤0.08	≤0.05	≤0.015	≤0.2	≤0.005

 

category	Alloy grades and characteristics
Alloy number:	TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19, Ti40,Ti60,TiAl(Ti36Al,Ti48Al2Cr2Nb),TiNi,TiNb,ZrTi
Particle size:	0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Morphology:	Spherical or nearly spherical
Appearance:	Grey
Package:	Aluminum bag,Vacuum packing
Application:	3D printing metal powder
Other applications:	powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.

How is 3D Printing Ti6Al4V Powder TC4 Powder produced?
Ti6Al4V was heat-treated to change the content of Ti6Al4V and the phase in the microstructure of the alloy. The microstructure will vary greatly according to the exact heat treatment and processing method. Three common heat treatment processes are mill annealing, two-phase annealing, solution treatment and aging treatment.

Applications of 3D Printing Ti6Al4V Powder TC4 Powder:
Ti6Al4V has the characteristics of good hardness, lightweight, formability and corrosion resistance, and is widely used in the aviation industry.

Ti6Al4V can be used in low to medium temperature environments where high strength, lightweight and excellent corrosion resistance are required. Such as aircraft steam turbine engine parts, aircraft structural parts, aviation fasteners, high-performance automatic parts, ships, medical equipment and sports equipment.

Implant and prosthesis (forged, cast or made by solid free-forming (SFF)) additive manufacturing.
Parts and prototypes for the racing and aerospace industries.
It is widely used in the Boeing 787.
Marine applications.
The chemical industry.
Gas turbines.
The gun silencer.

Storage Condition of Ti6Al4V Powder TC4 Powder:
The damp reunion will affect Ti6Al4V powder dispersion performance and using effects, therefore, titanium aluminum carbide Ti6Al4V powder should be sealed in vacuum packing and stored in cool and dry room, the TC4 can not be exposure to air. In addition, the Ti6Al4V powder should be avoided under stress.

Packing & Shipping of Ti6Al4V Powder TC4 Powder:
We have many different kinds of packing which depend on the Ti6Al4V powder quantity.
TC4 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
TC4 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.

If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

Ti6Al4V Powder TC4 Powder Properties
Other Names	Ti6Al4V Powder, TC4 Powder
CAS No.	N/A
Compound Formula	TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19, Ti40,Ti60,TiAl(Ti36Al,Ti48Al2Cr2Nb),TiNi,TiNb,ZrTi
Molecular Weight	N/A
Appearance	Grey powder
Melting Point	N/A
Solubility in water	N/A
Density	N/A
Purity	99%
Particle Size	0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling point	N/A
Specific Heat	N/A
Thermal Conductivity	N/A
Thermal Expansion	N/A
Young's Modulus	N/A
Exact Mass	N/A
Monoisotopic Mass	N/A
Ti6Al4V Powder TC4 Powder Health & Safety Information
Safety Warning	N/A
Hazard Statements	N/A
Flashing point	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
RTECS Number	N/A
Transport Information	N/A
WGK Germany	N/A

If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

Recently, the Turkish government announced that the Turkish President has signed a presidential decree to provide incentives for its Black Sea gas field development projects, including tax exemptions and other preferential measures.  

With a fixed investment of 145.1 billion Turkish lira ($10 billion), the project will employ 1,018 people and produce 14 billion standard cubic meters of gas per year, the decree reads. The incentives involved include tariff and VAT exemptions, as well as a range of tax cuts.

In June 2021, Turkish drill ships discovered 135 billion cubic meters of natural gas in the Sakaria field in the Black Sea, bringing Turkey's total gas discoveries in the region to 540 billion cubic meters.  

Turkey imports almost all of its annual gas consumption of about 50 billion cubic meters.  

Except for natural gas, the supply and prices of many other Ti6Al4V Powder will continue to be influenced by international situations.

Inquery us