News

  • 0
  • 0

The decision by major producers to maintain production cuts has had an impact on sand for mold making price

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



The decision by major producers to maintain production cuts has had an impact on sand for mold making price s .

The Organization of the Petroleum Exporting Countries (Opec) and non-OPEC oil producers held their 34th ministerial meeting via video on Thursday and decided to maintain the production cut target set at the 33rd ministerial meeting.

The 33rd Ministerial Meeting on October 5 decided to cut monthly production by 2 million barrels per day from August levels, equivalent to 2% of global daily oil demand, starting in November.

Opec issued a statement after its ministerial meeting on Thursday, stressing that the decision to cut production at the October meeting was solely based on market considerations.

A decision by major oil producers to cut production sharply failed to support international crude prices amid concerns about the outlook for the world economy. The main New York oil contract has fallen from more than $120 a barrel in June to around $80 now. Brent crude futures in London showed a similar trend.

The European Union, the Group of Seven and Australia announced a $60 per barrel price cap on Russian seaborne crude oil exports on Tuesday, adding to the market's uncertainty. Moscow says proposals such as restrictions on Russian oil imports and price caps on Russian oil would only lead to a spike in oil prices, like gas prices.

The 35th Ministerial meeting between Opec and non-OPEC producers will be held on June 4, 2023. But major producers said they would call an impromptu ministerial meeting if necessary to respond to changes in the crude market.

In April 2020, Opec and non-OPEC producers reached an agreement to cut production due to the impact of COVID-19 and other factors on oil demand. Starting in May 2021, major oil-producing countries began to gradually increase oil production as demand for oil recovered. In September, major producers announced their first monthly output cut in more than a year, cutting October output by 100,000 b/d.

Market trend of ceramic sand sand for mold making

The global market sales of foundry ceramic sand reached US $180 million in 2021 and are expected to reach US $270 million in 2028, with an annual compound growth rate (CAGR) of 5.4% (2022-2028).

The main sand for mold making global foundry ceramic sand manufacturers are CARBO Ceramics, Itochu Ceratech, Luoyang Kailin casting materials, King Kong New Materials, Sanmenxia strong Core Foundry Materials Co., Ltd., the top five global foundry ceramic sand manufacturers occupy more than 74% market share.

At present, Asia-Pacific is the world's largest market for foundry ceramic sand, accounting for about 53% of the market share, followed by Europe and North America, with a combined share of nearly 40%.

This report studies the production sand for mold making capacity, output, sales volume, sales volume, price and future trend of foundry ceramic sand in the global and Chinese markets.

This paper focuses on the product characteristics, product specifications, price, sales volume, sales revenue and market share of the major manufacturers in the global and Chinese markets.

The historical data are from 2017 to 2021 and the forecast data sand for mold making are from 2022 to 2028.

What is ceramic sand? The sand for mold making introduction

Ceramic sand is mainly processed by zirconia and is widely used in the "polishing strengthening" of aviation, ship, automobile, machinery and other metal parts; the "sandblasting finishing" of metal, plastic and other workpieces; the "cleaning and polishing" of the inner and outer walls of steel pipes and copper pipes; the "vibration polishing" of precious metal jewelry and small metal parts; and the "grinding and dispersion" of liquid and solid materials in chemical, pharmaceutical, food and other industries.

The unique sand for mold making physical and chemical properties of ceramic sand make it play an important role in aviation, aerospace, electronics, machinery and the rapidly developing IT industry, especially its internal molecular chain structure, crystal form and lattice change law, so that it has high temperature resistance, low coefficient of thermal expansion, high insulation, corrosion resistance, piezoelectric effect, resonance effect and unique optical properties.

Price trend of ceramic sand -sand for mold making price

Under the influence of sand for mold making the Fed's interest rate hike, commodity pressure has increased, while the downward volatility of international crude oil at the cost side and weak support on the demand side are also key factors dragging down the fall in chemicals. In August, the demand stimulus policy has been further strengthened, and the demand for some raw materials is expected to improve. The high supporting factors of global energy prices remain under the impact of the superimposed supply chain, and the decline in the chemical market is expected to narrow gradually in August.

First, under the global sand for mold making tightening policy, the downward pressure on chemicals has increased. Affected by the increase in interest rates by the Federal Reserve, people in the industry are generally more worried about the economic recession. under the guidance of market pessimism, the external quotations of most chemical products have been continuously lowered.

Second, raw materials such as international oil prices have fallen sharply, weakening the cost support for chemicals and dragging down the market atmosphere at the same time. Take crude oil as an example, sand for mold making the oil price showed an resistant decline during the month, although the supply side was still limited to support the fundamentals of oil prices, but the European Central Bank followed the Federal Reserve to raise interest rates aggressively, and the macro pressure did not abate. during the month, the fall in oil prices weakened support for the cost side of chemicals.

Third, supply is strong and demand is weak, and the impact on the supply and demand side is gradually strengthened. The supply side is generally loose. On the one hand, the gradual release of new production capacity has increased the supply of some chemicals.

On the other hand, since the second quarter, non-market factors have suddenly occurred and economic growth at home and abroad has slowed down. Sales of most chemicals are not smooth and inventory continues to accumulate. The demand side recovers slowly, and the consumption of chemicals increases slowly. Under the care of the sand for mold making demand stimulus policy, the terminal industry has gradually recovered, superimposed various stable growth policies have been gradually strengthened, and the overall performance of the demand side is cautious and optimistic, but the growth of real demand still needs a certain period of time. Overall, the demand side still has a negative impact on the price of chemical products.

Leading Ceramic Foundry Sand sand for mold making Supplier in China

SANMENXIA QIANGXIN FOUNDRY MATERIAL CO., LTD. ( Fused Ceramic Sand ) is specialized in the production and sales of high-end casting new material - fused ceramic sand for foundry (commonly known as "Ceramic Sand).

We (www.fusedceramicsand.com) are the professional manufacturer of ceramic foundry sand for foundry industries, high quality, good service and meet different needs for your project.

Featured Products:

Professional Foundry Ceramic Sand for multiple purpose,lower thermal expansion, resulting in higher precision and accuracy of castings.

Feel free to contact Fusedceramicsand .

Contact Info.

Email: sales@fusedceramicsand.com

Mobile: +86 15703799093

Inquiry us

  • tags

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It is easily soluble when heated alkali is used, but not in water.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2) Powder: Germanium Sulfid…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Molybdenum powder boride is a combination of molybdenum with boron. The chemical formula for molybdenum is MoB2, and the molecular weight is 202.69. Purity: >99%Particle size : 5-10um Molybdenum Boride MoB2 Pulp : Molybdenum-boride consists of moly…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal…